Dimplex HTC521W Especificaciones descargar pdf (Pagina 9)

Operation

While it is still in the Setting mode, press the DOWN button to toggle between the various

CYCLE RATES. There are 3 different cycle rates to choose from:

Cr Cycle Rates

Cr-0 OFF(xedspan)

Cr-1 20 seconds

Cr-2 240 seconds (4 minutes)

Cr 0 isaxedspan(nocycling),withavarianceof+/-0.3°C(+/-0.6°F).Theheatingunit

will operate at full power and the power bar will appear full. This function is for users who

do not want their electric heating devices turning on and off frequently. This is the recom-

mended setting for fan-assisted electric heating devices.

Cr 1 (Default) is a 20 second cycle rate with proportional heating. This means the heating

will be turned on and off once every 20 seconds to provide a stable room temperature. This

cycle rate allows a proportional level of power to the heating device. This is indicated on

thethermostatdisplaybythepowerbarwhichwillbepartiallylled;indicatingtheamount

of power going to the heater. This setting is recommended for non-fan assisted baseboards

andelectricheatingdevicesandwillprovidethemostenergyefcientheatingandastable

temperature.

Cr 2 is a 240 second span. This means the heating will be turned on and off once every

240 seconds. This is the recommended setting for fan assisted heaters, radiant ceilings

and convectors.

Selecting the Heat Cycle Rate . . . continued

1 2 3 4 5 6 7 8 9 10 11 12 13

Sin comentarios

Dimplex HTC521W Especificaciones Pagina 9