Dimplex HTC521W Especificaciones

Owners ManualHTC521WNon-Programmable Thermostat 3600WHTC525WNon-Programmable Thermostat 4000W7213100100R02

10OperationAdjusting the Desired Set TemperatureThe current /room temperature (A) is normally displayed on the LCD screen. To adjust the setting to th

11OperationHeating Power Level DisplayWhen the thermostat activates the heating system, the Heat “On” symbol will ap-pear. Equipped with an intelli

12Problem SolutionThe LCD screen is blank or abnormal• Make sure the thermostat is fully installed.• Check that the power supply has been reconnecte

13Limited 2-Year WarrantyThis product, excluding battery, comes with a two-year (2) warranty against manufac-turer's defects in workmanship and m

2Congratulations on your purchase of this Dimplex line-voltage thermostat. Your new ther-mostat is preprogrammed by the installer and ready to use. Pl

3Contact us at:  www.dimplex.com/customer_support For Troubleshooting and Technical Support OR  Toll-Free 1-888-DIMPLE

4InstallationThis product is for use with high voltage system (120V~240V) with a minimum load of 300W; it is not designed for use with low voltage (24

5InstallationStep-by-step Installation1. Remove the old thermostat carefully and identify the two wires from the wall box.2. Gently remove the facep

6*120V~240V AC Lines4. Mount the new thermostat onto the wall box using the two screws provided through the mounting holes, and then replace the f

7Operation❶ Current Temperature❷ Temperature Unit (°C or °F)❸ Heating Power Level❹ Heat “On” Indicator❺ Set TemperatureLCD Display / ButtonsLCD D

8OperationSelecting the Temperature Unit (°C or °F)This thermostat features an adjustable display setting that can display the temperature in either C

9OperationWhile it is still in the Setting mode, press the DOWN button to toggle between the various CYCLE RATES. There are 3 different cycle rates to