Dimplex LAB 09M Instrucciones de operaciones descargar pdf (Pagina 6)

5EN -

www.dimplex.de

1 Warnings regarding the

documentation

1.1 Use in compliance with the

documentation

The Dimplex LAB units are constructed according to the Euro-

pean technical standards and safety regulations. The heat pump

is designed and built for heating and domestic hot water produc-

tion (DHW). In the event of improper use, dangers to the user or

third parties may arise, as well as damage to the heat pump and

other objects. Any use not expressly indicated in this manual is

not permitted.

NOTE

Dimplex will not assume any responsibility for damage caused due to

failure to comply with these instructions.

1.2 Safe keeping of the

documentation

The installation manuals should be issued to the end user of the

heating system as part of the handover and training process. It is

then the responsibility of the user to keep the manuals safe for fu-

ture use by maintenance engineers.

ATTENTION!

READ THIS DOCUMENT CAREFULLY.

The installation of this heat pump must be carried out by a com-

petent person, who is suitably trained and qualified, including any

stipulations laid down by law. The appliance must be installed in

such a way as to enable maintenance and/or repairs to be car-

ried out. The appliance warranty does not cover the costs for fork

lift trucks, scaffolding, or other elevation systems that may be-

come necessary for carrying out servicing under warranty.

NOTE

The warranty will be invalid if the advice given within the Installation

instructions is not followed.

2 Fundamental safety

rules

You are reminded that you must adhere to the following safety

rules:

 This appliance is not suitable for use by persons (including

children) with limited physical, sensory, or mental capacities

or those lacking experience or knowledge, unless they are

supervised or instructed regarding the use of the appliance

by a person who is responsible for their safety. Children

must always be supervised to ensure they do not play with

the appliance

 It is prohibited to carry out any maintenance work before the

unit has been disconnected from the mains power supply by

switching off the master switch at the distribution board and

also the main power switch on the product casing.

 It is prohibited to modify the safety devices, or make any

physical adjustment to the heat pump without the manufac-

turer's written authorisation.

 It is prohibited to pull, detach, or twist the electrical cables

coming from the unit even if it is disconnected from the elec-

trical mains.

 It is prohibited to store flammable substances near to the

unit.

 It is prohibited to touch the appliance when you are barefoot,

or parts of the body are wet or damp.

 It is prohibited to leave the packing materials within the

reach of children.

2.1 Technical plate

LAB can be identified by:

 Packing label

reporting the identification data of the product.

 Technical plate

positioned in the hydraulic connections side panel

7HFKQLFDOSODWH

2.2 Safety precautions and

regulations

NOTE

The heat pump must be installed by a qualified and suitably trained

Engineer in accordance with the current legislation

NOTE

Dimplex will not assume any responsibility for damage due to failure to

follow these instructions. Before beginning any work, READ THESE

INSTRUCTIONS CAREFULLY AND CARRY OUT THE SAFETY CHECKS.

All the staff involved during installation must have thorough knowledge

of the working and any dangers that may arise during installation.

ATTENTION!

The refrigerant circuit is under pressure and can operate at very high

temperatures. The refrigerant circuit must only be maintained by a

qualified refrigerant engineer.

ATTENTION!

The heat pump is delivered with a sufficient quantity of R407C refrigerant

for operation. This refrigerant is chlorine-free and does not damage the

ozone layer. R407C is not flammable. However, all maintenance

operations must be carried out exclusively by a specialised refrigerant

engineer using suitable protective equipment.

Danger of electrical discharge! Before opening the

heat pump, completely disconnect the appliance

from the power mains.

1 2 3 4 5 6 7 8 9 10 11 ... 32 33

Comentarios a estos manuales

Sin comentarios

Dimplex LAB 09M Instrucciones de operaciones Pagina 6

Comentarios a estos manuales

Relacionado con productos y manuales para Bombas de calor Dimplex LAB 09M